🤍
HIPS
HIPS
Ударопрочный полистирол (High Impact Polystyrene)
Price
1200–2200 ₽
per 1 kg
Лёгкий и ударопрочный. Чаще используется как растворимая поддержка для ABS.
About
HIPS — модифицированный ударопрочный полистирол. Самостоятельное применение: лёгкие модели, корпуса, упаковка — материал лёгкий, дёшев, легко режется и клеится. Главная роль в 3D-печати — растворимая поддержка для ABS. HIPS растворяется в d-лимонене (цитрусовый растворитель) → можно печатать сложные модели с поддержками внутри, которые потом просто «смываются». Печатается на тех же настройках, что ABS, поэтому используется с ABS на принтерах с двумя экструдерами.
Properties
☀️UV resistancevery low
Doesn't fade in sunlight, doesn't crack outdoors
💥Impact toughnesshigh
Doesn't chip on impact. Not the same as stiffness — fiber-reinforced plastics are stiff but brittle on impact
🏋️Stiffnesslow
Doesn't bend under load, holds shape. Tensile strength
🤸Flexibility / elasticitymedium
Bends without breaking
⚗️Chemical resistancelow
Doesn't dissolve in gasoline, oils, alcohol
🌡️Heat resistancemedium
Keeps shape when heated
🛠️Print difficultymedium
Higher means harder for beginners
🌡️
Max operating temperature
75 °C
Above this the part starts to deform
♻️
Degradation / recycling
Не разлагается биологически. Перерабатывается.
What it's used for
- Растворимые поддержки для ABS-печати
- Лёгкие модели и игрушки
- Упаковка и макеты
- Расходные внутренние детали
Printer requirements
🌡️ Nozzle temperature220–245 °C
🛏️ Bed temperature90–110 °C
💨 Part cooling fanoff
📦 Enclosurerequired
🔥 Hardened nozzlenot required
💧 Filament dryingrecommended: 65 °C, 4 h
⚠️ Special hardware requirements:
- Enclosure. The plastic shrinks significantly as it cools — corners will lift (warping). An enclosure is needed to keep ambient temperature stable (40–60 °C).